Mobileraker Companion

Mobileraker works as a simple UI for Klipper on the phone. Connect it to an existing moonraker installation and control the printer.

You must not setup Mobileraker on a K1 series machine (which includes Ender 3 V3 KE, NebulaPad and Ender 5 Max) because it will overwhelm the processor and cause serious stability issues.

Instead install the Mobileraker Companion on another device on the same network as the printer.

Note

It's probably fine to setup Mobileraker on the same host as Simple AF if using Simple AF for RPi series.

https://github.com/Clon1998/mobileraker_companion?tab=readme-ov-file#standalone-installation